| |
| Chem-Energy
can make arrangement for the supply of the following petrochemicals
on bulk basis both in the USA and from the international market. |
1.
Toluene
2.
Xylene
3.
MTBE
4.
ETBE
5. Chemicals
6.
Degreasers
7.
Lubricants
8.
Ethanol
9.
Anhydrous Alcohol
|
Toluene
Specifications
TOP
Pure Aromatic Hydro Carbon. Its highly solvent Power combined
with a fast evaporation rate, makes it one of the most commonly
used solvent. It's widely used in lacquer thinner formulation
and as a diluent in enamels for spray applications.
The printing industry uses Toluene or blend
of Toluene and aliphatic Solvents as carrier for inks used
in high speed printing presses.
It is also used in rubber and adhesive industries
where high solvency Power than that of Hexane and Fluden 512
is required. It is also used a feed stock in the manufacturing
of TNT (Tri Nitro Toluene), TDI and other chemicals.
Toluene meets ASTM D841 for Nitration grade
Toluene.
Product
Specifications |
| Property |
Unit |
Min |
Max |
Test
Method |
| Density@20
deg C |
kg/1 |
0.885 |
0.870 |
ASTM
D1298 |
| Color
|
Saybolt |
+25 |
|
|
|
Distillation Range |
|
1 deg C |
Max
including 10.6 |
ASTM
D86 |
| Sulfur
Compounds |
Free
of H2S and SO2 |
ASTM
D853 |
| Non
Aromatics |
% |
v/v |
1.5 |
ASTM
D2360 |
| Acid
Wash Color |
|
|
2.0
|
ASTM
D848 |
| |
|
|
|
|
| Physical
Properties |
|
|
|
|
| Property |
Unit |
Typical |
Test
Method |
| Appearance
|
|
Water
White (colorless |
Visual
|
| Flash
Point, Tag |
Deg
C |
9.0
|
ASTM
D56 |
| Copper
Corrosion |
|
Nil
|
ASTM849
|
| Purity
|
|
Must
Match |
ENE
01/99 |
| Acidity
|
|
Nil
|
D
847 |
|
| |
|
|
|
|
|
| These
are the typical specs of Toluene and not necessarily guaranteed
by Chem-Energy Corporation or its trading partners.
|
| |
| Specifications
for Xylene TOP
MIXED XYLENE |
| PROPERTIES
|
SPECIFICATIONS
|
TEST
METHOD |
APPEARANCE
|
CLEAR FREE OF HAZE
& SEDIMENT |
VISUAL |
| DENSITY
AT 15.6 DEG.C(G/Cm3) |
0.865-0.875
|
ASTM
D-4052 |
| COLOR
PT-CO |
SCALE
MAX.20 |
ASTM-D
1209 |
ACID
WASH COLOR
|
MAX.6 |
ASTM
D-848 |
| PARA
XYLENE WT.% |
MIN.16.5
|
ASTM
D-2306 |
| ORTHO
XYLENE WT.% |
MIN.15.0 |
ASTM
D-2306 |
| ETHYL
BENZENE WT.% |
MAX.18.0 |
ASTM
D-2306 |
| METHA
XYLENE WT % |
MAX.49.0
|
ASTM
D-2306 |
| BENZENE
WT.% |
MAX.0.02
|
ASTM
D-2306 |
| TOLUENE
WT.% |
MAX.0.04 |
ASTM
D-2306 |
| C9
AROMATIC WT.% |
MAX.0.5 |
ASTM
D-2306 |
| NON
AROMATIC WT.% |
MAX.0.05 |
ASTM
D-2306 |
| TOTAL
SULFUR WT.PPMTOTAL SULFUR WT.PPM |
MAX.1.0 |
UOP
727 |
| TOTAL
CHLORIDE WT.PPM |
MAX.1.0
|
|
| MICRO
COULOMETRYLEAD CONTENT WT.PPB |
MAX.10 |
|
| ATOMIC
ABSORPTION BROMIDE INDEX |
MAX.20 |
D-1492 |
|
| |
| Specifications for Ethanol TOP
96% Ethanol |
| PROPERTIES |
SPECIFICATIONS |
TEST METHOD |
STRENGTH BY VOLUME
|
G.L |
96:00 |
| Dry matter |
grm/h1 |
|
| Acidity as acetic acid |
grm/h1 |
|
Esters as ethyl acetate
|
grm/h1 |
|
| Aldehydes as acetaldehyde |
grm/h1 |
|
| Methanol |
grm/h1 |
Less than 2.0 |
| Fusel Oil |
grm/h1 |
Less than 5.0 |
| Higher Alcohols as |
grm/h1 |
Nil |
| Methuyle-2, Proponal-1 |
grm/h1 |
Nil |
| Propanol-1 |
grm/h1 |
Nil |
| Butanol-1 |
grm/h1 |
Nil |
| Barbet Test |
ppm |
Above 25 Minutes |
|
| |
| Specifications for Anhydrous Alcohol TOP
Anhydrous Alcohol |
| PROPERTIES |
SPECIFICATIONS |
STRENGTH at 15 C
|
99.95% min |
| Dry matter |
0.38 gm / hl |
| Acidity |
0.36 gm / hl |
Esters as Acetate
|
0.15gm /hl |
| Aldehydes |
0.15gm /hl |
| Methanol |
0.091 gm /hl |
| Furfurals |
negative |
| Higher Alcohols |
0.38 gm /hl |
| Crotonaldehydes |
Absent |
| Hydrocarbon |
Absent |
| KMnO4 |
30-39 minutes |
|
| |
| |
| Chemicals
TOP |
| Chemicals
are the important commodities of every one's life. From home
to the office, from one place to another, every day life, we
use chemicals. The most important chemicals used in our daily
life are: 1. Xylene 2.Toloune
|
| |
